- WANLIN-230 is a 60GHz millimetre-wave fall detection monitor: wall-mounted, camera-free, and immune to temperature, humidity, noise, airflow, dust and lighting - conditions that defeat optical sensing.
- It reports four state families in real time: presence (someone / no one), activity (active / still), falls, and prolonged stationary residence - every change pushed to the cloud platform for app and phone-call alerts.
- Coverage: 100 degrees horizontal by 80 degrees vertical, roughly a 4 x 4 metre zone; wall mounting at 1.8-2.4 m with a 30-degree downward tilt, centred on the resident’s main activity area.
- After a detected fall the device asks aloud “Did you fall?” - the resident answers by voice; confirmed or unanswered events escalate. Detection thresholds are configurable: fall timing 5-180 s, stillness timing 1-60 min.
- Voice interaction supports custom wake words through a guided learning mode, plus hands-free help calls. Presence response under 300 ms; a lying posture is reported about 5 seconds after the person lies down.
- 7-day presence and fall history in the app; 4G connectivity; 5V/2A power; -10 to +60 Celsius operation. In mainland China the device carries statutory three-guarantee service (7-day return, 15-day replacement).
Most fall detection asks people to wear something or accept a camera in the bedroom. The WANLIN-230 takes a third path: a 60GHz millimetre-wave radar mounted on the wall that senses human presence, movement, breathing-scale micro-motion and the sharp kinematics of a fall across a roughly 4 by 4 metre area. It works with lights off, in humid damp bathrooms, in dust, in winter - conditions that defeat optical sensors - and it never records an image.
Four sensing functions in one wall-mounted unit
| Function | What it does |
|---|---|
| Human presence | Real-time monitoring of whether the zone holds someone, and whether they are active or still. Presence triggers in under 300 ms - faster than PIR motion sensing - while “no one” is declared only after breathing-scale micro-motion stays absent for a full judgement window, so a sleeping resident is never counted as absent. |
| Fall state | Recognises the kinematics of a person falling. The state persists until the person is safely back on their feet, and the report timing is configurable (5–180 s) so brief crouches do not page anyone. |
| Prolonged stillness | Flags a person who stays motionless too long - fainting, sitting frozen, lying unmoving - with a configurable threshold of 1–60 minutes. The alert clears only when the person resumes activity. |
| Voice interaction | Two-way spoken exchange: the device asks, the resident answers, and custom wake words can be taught through a guided learning mode for hands-free help calls. |
The conversation after a fall
When the radar registers a fall, the WANLIN-230 speaks first instead of paging blindly:
- Device: “Did you fall?”
- Resident: “I fell” → Device: “Please wait, I will notify the guardian right away” → “The guardian has been notified.”
- Resident: “I did not fall” → Device: “OK”, and the event closes.
Caregivers see the state in the app at the same time, with the event recorded. For residents who cannot reach the device, wake words can be personalised: saying “enter learning mode” then “start learning” walks the resident through recording their own phrases (for example “someone come” or “I fell”) in a quiet room, and the device confirms each one. A voice command also restores factory settings when a room changes hands.
Coverage and mounting rules that make it accurate
| Item | Specification |
|---|---|
| Detection field | 100° horizontal, 80° vertical; roughly 4 × 4 m of usable coverage (shrinkable in configuration) |
| Mounting position | On the wall, detection face tilted downward, centred on the resident’s main activity area |
| Height | 1.8–2.4 m; 1.8 m recommended and factory-default, with a 30° downward tilt for fall detection |
| Keep clear | No obstruction in front of the radar face; avoid mounting near range hoods, extractor fans, running water, air outlets, or anywhere vibration and moving objects can confuse micro-motion sensing |
| Fit-up | Metal base plate fixed with screws into wall plugs (adhesive pad optional), device body clipped in and angled, then powered and paired |
Because the radar reads micro-motion, the environment matters more than the hardware: a fluttering curtain or a robot vacuum inside the zone can delay a “no one” judgement. The manual’s advice is to survey the room before drilling - confirm network signal, keep a 220V (5V/2A adapter) socket within reach, and place the device where its beam cone covers the bed-to-bathroom path, which is where most falls happen.
What to configure first in the app
- Mounting height – set the actual distance to the floor so the radar model matches the room.
- Fall timing – 5–180 s. Short windows react faster but page on slow slides; care teams usually start mid-range and tune per resident.
- Stillness timing – 1–60 min for the prolonged-residence alert.
- Alert schedule – define the hours when pushes and calls should fire, per room.
- Feature switches – fall detection and stillness detection can each be toggled independently (both default on).
The app also keeps a 7-day history of presence and fall events with timestamps - useful for care reviews and family reassurance. Pairing runs over 4G through the companion app; a lying posture is reported about five seconds after the person lies down, and the status panel shows someone / no one, active / still, plus alarm states at a glance.
Specifications
| Parameter | Value |
|---|---|
| Model | WANLIN-230 |
| Radar frequency | 60 GHz millimetre-wave |
| Wireless connection | 4G (companion app pairing) |
| Rated input | 5V, 2A (an under-rated adapter degrades detection performance) |
| Adapter input | 180–240V~, 50/60 Hz, 0.6A |
| Operating temperature | -10°C to +60°C |
| Operating humidity | 0–95% RH, non-condensing |
| Detection coverage | Approx. 4 × 4 m; 100° horizontal / 80° vertical |
| Indicator states | Red flashing (pairing, 90 s timeout), solid red (offline), green 3 s (connected), blue (key pressed) |
Where it fits in a care safety plan
The WANLIN-230 answers the worst question in eldercare - how long someone has been on the floor? - without asking residents to wear a pendant or accept a camera. One unit per room covers the typical bedroom or lounge zone; bathrooms-adjacent placements benefit from the radar’s tolerance of steam and low light. Every state change rides the same cloud platform Wanlin uses for smoke and electrical alarms, so a single dashboard can carry fire, electrical and fall events for the whole facility, with app messages and phone calls as the escalation path. For room counts, layout review and pricing, contact 16710807777.
After-sales note: units sold in mainland China carry statutory three-guarantee service - return within 7 days and replacement within 15 days of receipt for quality issues, with repair per warranty terms. Damage from unauthorised repair, misuse, liquid ingress or expired warranty is excluded per the manual.
From this site: related products, news and FAQ
Fall detection works best as part of a room-level safety plan. The entries below are drawn live from this site’s own catalogue, newsroom and FAQ section - companion detection hardware and the context for specifying it.
Product line
- 10-year standalone smoke alarm for Indonesia Buyers: WANLIN-307 Standalone Smoke Alarm Fac
- Email smoke alert for Sweden Buyers: WANLIN-307 Standalone Smoke Alarm Factory Direct from
- Smoke detector manufacturer for Indonesia Buyers: WANLIN-307 Standalone Smoke Alarm Factor
- Morley smoke detector alternative for Sweden Buyers: WANLIN-307 Standalone Smoke Alarm Fac
Latest news
Key questions, answered
Does the WANLIN-230 use a camera or a wearable?
Neither. It is a 60GHz millimetre-wave radar mounted on the wall. It senses human presence, movement, breathing-scale micro-motion and fall kinematics across a roughly 4 × 4 metre zone, and it captures no images. Detection is unaffected by temperature, humidity, noise, airflow, dust or lighting, which lets one device cover dim bedrooms and bathrooms-adjacent spaces where optical sensors struggle.
How does it avoid waking caregivers for every false alarm?
When the radar registers a fall, the device first asks aloud “Did you fall?” The resident answers “I fell” - the device confirms and notifies the guardian - or “I did not fall”, which closes the event. Configurable windows add a second filter: fall states report only after a set 5–180 second window, and prolonged-stillness alerts only after 1–60 minutes, both tuned per room in the app.
Scope disclosure: this page restates the WANLIN-230 user manual in plain English for care operators and purchasers; it is product documentation, not a certification claim, and actual radio, safety and RoHS compliance for a given shipment should be verified against the certificates for that model and market. App features depend on the companion app version and mobile network coverage. To request the full manual and a quotation, contact wanlinfirecontrol@163.com or 16710807777.
What to watch
Watch for: radar fall detection moving from pilots to standard fit-out in senior living renovations, and pairing rules that combine radar presence data with smoke and electrical monitoring on one care dashboard.
Also on this site: the full topic guide hub, express delivery station fire safety, MLPS fire IoT special report, and the site’s contact page for room surveys and quotations.